We provide quality installation of all Unfinished and Pre Finished Engineered Flooring. Engineered flooring can be installed with a glue down or nailed down application. Engineered wood flooring consists of a hardwood wear layer that is bonded to a core of constructed wood.
Before you begin the installation, ensure that your subfloor is clean and free from any debris. Take special treatment to eliminate any protruding nails or staples that might have been left out from the prior floor. Vacuum and sweep the floor to eliminate any dirt. Make certain the ground has thoroughly cleaned before carrying on with the installation.
Start by going one row over the longest wall membrane of the area. The ground planks are tongue-and-groove style, so they must slide right along. Manufacturers advise that you install the planks with the tongue aspect against the wall membrane and the groove aspect facing in to the room. Make use of a pneumatic flooring stapler to operate a vehicle staples through the groove at a 45-level position. Put a staple every six to eight 8 inches. If you’re having difficulty getting the planks to slip collectively easily, use a plastic mallet to pressure them together.
Understandably the last thing you’ll want to do after a complete installation is clean your home. We assure you, your space will be treated as if it is our own. As we complete your hard surface flooring installation, our specialists will clean up and excess debris and remove the old flooring from your home. To keep your flooring in its best condition, we recommend regular cleanings following the best practices for your particular flooring.